General Terms and Conditions
These Williams Innovation General Terms and Conditions (hereinafter referred to as the “Terms” or “Agreement”) apply to the use of products or services provided by Williams Innovation (“Williams Innovation,” “Williams Innovation , LLC” or “Company”) to the person or entity identified in a valid and binding Sales Order (the
“Customer”) and are an integral part of the agreement between Williams Innovation and Customer. The Customer and Williams Innovation are sometimes collectively referred to herein as the “Parties,” or individually as a “Party.” By ordering, purchasing, or using the Services, Customer agrees to be bound by these Terms, which among other things, require mandatory arbitration of disputes instead of a jury trial and limit Williams Innovation’s liability.
Definitions. The following capitalized terms, as used in this Agreement, shall have the meanings set forth below:
“Affiliate” means, with respect to a party to these Terms, any entity that Controls, is Controlled by or under common Control with such party. “Control,” for purposes of this definition, means the direct or indirect ownership or control of more than fifty percent (50%) of the voting equity of the subject entity.
“Applicable Laws” means any and all applicable federal, state or local laws, rules or regulations including applicable restrictions concerning call recording, call monitoring, call interception and/or direct marketing or telemarketing.
“AUP” means the Williams Innovation acceptable and reasonable use policy set forth at https://williamsinnovation.com/legal/AUP
“Customer Data” means any data, information or other materials of any nature whatsoever generated by Customer, or provided to Williams Innovation by or through Customer, in the course of implementing or using the Services.
“Customer Equipment” means all equipment owned, leased or otherwise provided by Customer, or which is specifically identified in one or more Sales Orders as Customer Equipment, used in connection with the Services. “Customer Equipment” includes equipment sold by Williams Innovation to Customer, but does not include Williams Innovation Equipment.
“Customer Premises” means the physical location(s) owned or leased by Customer where Services are provided or Williams Innovation Owned Equipment will be used or stored.
“E911 Acknowledgement” means the provisions set forth in the Williams Innovation E911 Disclosure Notice and
Acknowledgement set forth at https://williamsinnovation.com/legal/e911 attached to and incorporated by reference into a Sales Order and/or executed by Customer acknowledging Williams Innovation’s policies regarding the availability and limitations of E911 service.
“Initial Service Term” means the period of time stated in a Sales Order during which Williams Innovation will provide Services to Customer.
“Williams Innovation” means Williams Innovation, LLC or any Affiliate of Williams Innovation providing Services to a Customer as identified in a Sales Order.
“Williams Innovation Equipment” means all equipment that is used, leased or otherwise provided by Williams Innovation in connection with the Services, including phones, routers, switches and battery backup placed on the Customer Premises.
“Private Circuit” means a telecommunications circuit provided or managed by Williams Innovation and used in connection with the Services.
“Renewal Service Term” means a period of time after expiration of the Initial Service Term that for a duration of 12 months unless otherwise specified.
“Sales Order” means a valid and binding agreement for the purchase of Services that has been signed by an authorized representative of Customer and accepted by Williams Innovation and shall automatically incorporate these Terms by reference.
“Service” or “Services” means all products or services provided or made available by Williams Innovation to Customer that are set forth in a Sales Order.
“Service Date” means the date that Service is installed, activated and available for Customer’s use at a Customer Premises.
“Service Level Agreement” means the terms and conditions that outline Williams Innovation’s responsibilities in connection with delivery by Williams Innovation to Customer of those Services to which service level commitments apply, as solely determined by Williams Innovation.
“Service Term” means the Initial Service Term and all subsequent Renewal Service Terms.
“Software” means any proprietary software (including any documentation relating to such software) owned or licensed by Williams Innovation, or which Williams Innovation has a right to sublicense under this Agreement, which software is either provided to Customer under this Agreement or is used by Customer in connection with the Services.
“Taxes and Fees” means any taxes and fees arising in any jurisdiction imposed on or incident to the provision, sale or use of Service and Williams Innovation Equipment, including value added, sales, use, gross receipts, excise, franchise, public utility or other taxes, fees, duties or surcharges (including universal service, 911 and other regulatory fees and surcharges), and certain recovery fees, whether imposed on or by Williams Innovation or a Williams Innovation Affiliate.
- TERMS AND POLICIES.
These Terms incorporate and include all additional terms, conditions and policies that are (i) set forth in an addendum, schedule, exhibit or amendment to these Terms, (ii) set forth in an applicable Service Level Agreement. These Terms supersede and replace all terms and conditions set forth in any documents issued by Customer, including purchase orders and specifications. Williams Innovation reserves the right to change any of the Terms at any time, but only on a prospective, not retroactive, basis. Williams Innovation will provide Customer thirty (30) days advance notice of changes to the Terms that would have a materially adverse effect on Customer. Notice may be provided by posting the revised or modified Terms to https://williamsinnovation.com/legal/terms, through Customer’s invoice or by e-mail to the most recent email address associated with Customer’s account. Changes will become effective on the next business day following the 30-day notice period and Customer agrees to be bound by any changes after such 30-day notice period.
- SALES ORDER.
All Services will be described in a Sales Order, which will set forth as applicable: (i) the price, delivery, installation location(s) and other information about the Services; (ii) Williams Innovation Equipment being offered for sale or lease to Customer; and (iii) any associated delivery or installation information. The Sales Order incorporates by reference these Terms, and when executed by Williams Innovation and Customer, becomes a binding contract between Williams Innovation and Customer. Williams Innovation will provide, and Customer will pay for and receive from Williams Innovation each Service pursuant to the terms and conditions of each Sales Order. Unless otherwise stated in the Sales Order the standard rates for Contiguous 48 US Long Distance will be billed at a rate $.03 per minute, Inbound Toll-Free Service will be billed at a rate of $.045 per minute, Conference bridges will be billed at a rate of $.10 per minute per user, directory assistance calls will be billed $1.99 per call and International charges will be billed based on the standard International Rates. Subject to Williams Innovation’s right to amend the Terms in Section 1, a Sales Order may only be amended in writing signed by both Customer and Williams Innovation.
- INSTALLATION AND EQUIPMENT.
- Permissions and Consents. Customer shall provide Williams Innovation, at no cost to Williams Innovation, all permissions, consents or authorizations necessary to install, activate, maintain, inspect, alter, repair and replace the Service and any Williams Innovation Equipment, including the right to access and enter Customer’s Premises.
- Customer Equipment. Customer understands and acknowledges that installation and delivery of the Services may require the use of certain Customer Equipment and/or Williams Innovation Equipment. Customer represents that it owns or otherwise has the right to use the Customer Equipment in connection with the Services. Customer shall be fully responsible for the installation, maintenance, repair and operation of any Customer Equipment and shall ensure the compatibility of any Customer Equipment with Williams Innovation Equipment. Customer will not (i) relocate, rearrange, repair, disconnect or otherwise modify the Service or any Williams Innovation Equipment without Williams Innovation’ prior written consent; or (ii) create or allow any liens or other encumbrances to be placed on any Williams Innovation Equipment. Customer will use commercially reasonable efforts to protect and maintain Williams Innovation Equipment in a secure location at the Customer Premises within conditions (including room temperature) that are customary and reasonable for such equipment, and shall be fully liable for all costs, charges or expenses associated with damage to or loss of Williams Innovation Equipment beyond normal wear and tear. Any Williams Innovation Equipment (and any replacements thereof) may be refurbished equipment, so long as the equipment is of good quality and appearance and supports the Services.
- Equipment Return. Upon the termination of this Agreement or any Service, Customer shall securely pack, ship and return to Williams Innovation all Williams Innovation Equipment at Customer’s expense. Williams Innovation may invoice Customer, and Customer shall pay, for the full replacement value of any Williams Innovation Equipment that has not been timely returned to Williams Innovation. In addition, if Customer has not returned the Williams Innovation Equipment within ten (10) days after the termination of the applicable Service, then upon not less than twenty four (24) hours’ prior notice, Customer will provide access to Williams Innovation and/or its agents during normal business hours for the retrieval and removal of Williams Innovation Equipment from Customer Premises and Williams Innovation may charge Customer’s selected method of payment, and Customer will pay and be liable for up to a one thousand dollar ($1,000) equipment return fee per Customer location.
- Non-Exclusive License. If Software is provided by Williams Innovation in connection with the Services, Williams Innovation grants to Customer a personal, limited, revocable, non-exclusive, non-assignable and non-transferable license to use the Software, in object code form only, solely for the purpose of using the Service. This license will permit such use by Customer and any of its employees or contractors (but only within the scope of their employment or services with Customer) authorized by Customer to use the Service, provided that Customer shall be responsible for all uses of the Service as provided in this Agreement. This license commences upon Williams Innovation’s acceptance of the Sales Order for the Service and terminates immediately upon the expiration or termination of this Agreement for any reason. Customer shall return or destroy all Software and any related written material, together with any copies, in its possession or under its control promptly upon the expiration or termination of this Agreement for any reason. Any attempt to sublicense, assign or transfer any of the rights, duties or obligations under this license is void and may result in termination by Williams Innovation of this Agreement and the license. No other licenses or rights to the Software are granted or implied.
- End User Licenses. Certain Software Williams Innovation provides to Customer may contain third-party software
(“Third-Party Software”), including open source software. Use of such Third-Party Software may be governed by separate copyright notices and license provisions, which may be found or identified in documentation or on other media delivered with the Third-Party Software and which are incorporated by reference into this license. Notwithstanding any other terms in this Section 4, such provisions shall govern the use of Third-Party Software. Customer agrees to comply with the terms and conditions of all end user license agreements accompanying any Software (including Third-Party Software) or plug-ins to such Software distributed in connection with the Service. All end user licenses shall immediately terminate on the date that the Service expires or this Agreement is terminated.
5. SERVICE TERM AND TERMINATION.
- Service Term. Each Sales Order will set forth the Initial Service Term. In the absence of a specific period of time stated in the Sales Order, the Initial Service Term shall be thirty-six (36) months. The Initial Service Term will begin on the Service Date. Sales Orders which describe delivery of Service to multiple Customer Premises may identify multiple Service Dates and Service Terms. The Initial Service Term will automatically renew for a Renewal Service Term of 12 months (with automatic renewal of subsequent Renewal Service Terms of 12 months) unless either Party terminates the applicable Sales Order by giving the other Party written notice of termination not less than ninety (90) days prior to the expiration of the Initial Service Term, or applicable Renewal Service Term, as the case may be. Notwithstanding notice by a Party to terminate this Agreement, Services with a remaining Service Term will remain in effect through the applicable Service Term and the terms and conditions of this Agreement and the applicable Sales Order will continue to apply to such Services. Upon termination of the applicable Service Term, Williams Innovation will not be obligated to furnish the Services to Customer; provided, however, if Williams Innovation continues to provide Services and Customer accepts and continues to use the Services after termination of the Service Term, such use shall be on a month-to-month basis and Customer shall be obligated to pay for such Services at then-current monthly rates for such Services.
- Customer Cancellation and Termination Charges Prior to Service Date. If Customer cancels all or any part of the Service prior to the Service Date for the applicable Service, except as may be expressly permitted by this Agreement, then Customer’s liability for such cancellation shall be an amount equal to: (a) all charges (including applicable taxes) incurred by Williams Innovation as a result of such cancellation, including recurring and non-recurring charges, third-party license fees or early termination fees or charges associated with any Private Circuit or other Service; plus (b) two (2) months of the forecasted monthly recurring charges or monthly commitment level payments for the Service. Williams Innovation may automatically charge Customer’s selected method of payment or Customer shall pay such cancellation amount immediately upon receipt of an invoice therefore, at Williams Innovation’s option.
- Customer Cancellation and Termination Charges After Service Date. Customer may terminate specified Service(s) after the applicable Service Date upon thirty (30) days’ written notice to Williams Innovation and any additional charges will be prorated from date of notice. If Customer does so, or if Service is terminated by Williams Innovation hereunder as the result of Customer’s default, Customer shall pay Williams Innovation a termination charge equal to the sum of: (i) all unpaid amounts for Service actually provided; (ii) 100% of the remaining monthly recurring charges through the end of the Service Term; (iii) if not recovered by the foregoing, any termination liability payable to third parties resulting from the termination and any out of pocket costs of construction to the extent such construction was undertaken to provide Services hereunder; and (iv) applicable Taxes and Fees on all of the foregoing.
- Relocation of Services. If Customer wishes to move Services to a different location, then Customer will request such move in writing to Williams Innovation at least 12 weeks in advance. If such new location is within Williams Innovation’s serving area, then Customer and Williams Innovation will enter into a new contract of length no less than the original Service Period. Such new contract may include additional or different installation, recurring and other charges and fees. If such new location is not within Williams Innovation’s serving area or Services cease at the prior location and such new agreement for the new location is not entered into by the parties, then the Agreement will be deemed terminated by Customer and Early Termination Charges will apply.
- Early Termination Fees and Charges. Customer understands and agrees that Williams Innovation will incur substantial losses upon an early termination of Service, which may include: (i) upfront costs from third-party service providers and subcontractors; (ii) commitments to subscription-based services related to the provision of the Services; (iii) allocation of substantial labor force resources to mobilize for the provision of the Services; (iv) substantial opportunity costs and lost profits. Customer acknowledges and agrees that the precise losses incurred by Williams Innovation as a result of an early termination are difficult to ascertain and that the early termination charges set forth in this Section 5 are fair and reasonable estimates of Williams Innovation’s anticipated and actual damages, and not a penalty.
6. BILLING, CREDIT, DEPOSITS AND PAYMENT.
- Commencement of Billing. Billing will commence on the Service Date and will not be delayed due to Customer’s readiness to accept or use the Service. In the event the Service includes a Private Circuit, billing for the Private Circuit will begin on the date the Private Circuit is delivered to any Customer Premises. If Customer notifies Williams Innovation within two (2) business days after a Service Date that Service is not functioning substantially in accordance with applicable specifications, with such notice specifying the deficiencies, Williams Innovation will work to correct any deficiencies and, subject to the preceding sentence, the Service Date will occur when such issues have been resolved. If the specified issues were not, in Williams Innovation’s determination, attributable to Williams Innovation, its agents, or contractors, the original Service Date for that Service will remain unchanged.
- Information and Installation Responsibilities. Customer acknowledges and agrees that the Service may be comprised of multiple Private Circuits and/or Services ordered from Williams Innovation for installation at one or more designated Customer Premises. Customer is obligated to timely provide to Williams Innovation access to the location where the Service is to be installed, as well as any relevant information and documentation.
- Customer Address Accuracy. Customer shall provide Williams Innovation with the correct address at which Services will be provided. Williams Innovation relies on the accuracy and completeness of such information to determine and invoice applicable taxes, fees, surcharges and assessments. If Customer does not provide a valid address, Customer will be responsible for any resulting taxes, fees, surcharges, assessments and penalties.
- Expedited Service Date. Customer may request an expedited Service Date and Williams Innovation will notify Customer of any additional charges required to process the request for an expedited Service Date, which shall include, but not be limited to, any third party charges incurred by Williams Innovation to expedite the Service
(“Expedite Charges”). If Williams Innovation accepts the expedited Service Date request, Customer will be obligated to pay the agreed upon Expedite Charges as set forth on the Sales Order.
- Credit Approval and Deposits. Customer agrees to supply Williams Innovation with the information necessary to verify Customer’s credit rating prior to providing Customer with access to the Services or Equipment. Williams Innovation may also, during the Service Term of this Agreement, update its information regarding Customer’s credit rating without notice to or permission from Customer. Customer authorizes Williams Innovation to make inquiries and to receive information about Customer’s credit experience from others, enter this information in Customer’s file, and disclose such information concerning Customer to appropriate third parties for reasonable business purposes. Williams Innovation reserves the right any time during the Service Term, in its sole discretion, to refuse to provide Service based upon lack of Customer’s creditworthiness, or in the alternative to require a security deposit that will be returned to Customer, without interest thereon, upon the expiration or termination of this Agreement or other form of secure payment authorization, such as auto-payment. Customer authorizes Williams Innovation to offset any amounts due to Williams Innovation against the security deposit.
- Payment of Invoices and Disputes. Invoices are delivered monthly. Fixed charges are billed in advance and variable, usage-based charges are billed in arrears. Billing for partial months is prorated. Payment is due upon receipt of invoice and in no event later than thirty (30) days after the invoice date. Charges for installation of Services shall be as stated in the Sales Order and shall be payable along with Customer’s initial invoice. Past due amounts bear interest at the lower of 1.5% per month or the maximum rate allowed by law. All fees and charges (together, “Service Fees”) and any other amounts due to Williams Innovation may, at Customer’s direction, be charged to Customer’s Visa, MasterCard, American Express or other valid credit or debit card, and/or electronically debited to Customer’s bank account, in which case Customer hereby authorizes Williams Innovation to charge Customer’s credit/debit card and/or to electronically debit Customer’s bank account for all such fees, charges (including termination-related charges), taxes and payment transaction processing costs. Pre-paid cards are not accepted. If Customer reasonably disputes an invoice, Customer must pay the undisputed amount and submit written notice of the disputed amount (with details of the nature of the dispute and the Services and invoice(s) disputed) to the address below on or before the due date. In the event Customer intends to dispute amounts already paid in full, Customer must submit notice of such dispute in writing within ninety (90) days from the date of the invoice (such date at the end of such period being the “Dispute Due Date”). After receipt of notice of the dispute, Williams Innovation shall undertake an investigation of the dispute, so long as Customer has not waived its rights pursuant to this paragraph to make the dispute. At the conclusion of the investigation, Williams Innovation will notify Customer of any amount determined by Williams Innovation to be correctly charged and such amount will become immediately due and payable together with interest from the date originally due. If the dispute notice is not sent by the Dispute Due Date, Customer waives all rights to dispute the applicable charges, unless otherwise provided by law. All billing disputes must be sent to Williams Innovation at email@example.com. If Customer does not deliver full payment for all undisputed billed charges by the due date, Williams Innovation may impose late payment fees and/or restrict, suspend or terminate use of the Services or Equipment. Returned checks are subject to imposition of returned check fees and charges. Customer shall also reimburse Williams Innovation for all reasonable attorneys’ fees and other costs incurred by Williams Innovation relating to collecting delinquent payments or Customer’s non-payment breach of this
Agreement. Williams Innovation may also apply any deposits or other payments made by Customer. If Williams Innovation applies any portion of a security deposit, Customer shall, within five (5) days following written notice thereof from Williams Innovation, replenish the security deposit by the amount so applied by Williams Innovation. If Williams Innovation restricts, suspends or terminates Customer’s Services, Williams Innovation may, at its sole option, choose to restore Customer’s Services prior to the payment of all charges due. Such restoration shall not be construed as a waiver of Williams Innovation’s right to (i) receive full payment for all charges due or (ii) again restrict, suspend or terminate the Services at any time for non-payment of any unpaid charges. The failure of Williams Innovation to restrict, suspend or terminate the Services for non-payment of any charges shall not operate as a waiver or estoppel to restrict, suspend or terminate Services of such account for non-payment of current or future charges.
- TAXES AND FEES.
Prices for Services do not include, and Customer is responsible for, all Taxes and Fees. Customer may present
Williams Innovation with an exemption certificate eliminating Customer’s and Williams Innovation’s liability to pay certain Taxes and Fees. Williams Innovation may charge a regulatory recovery fee to offset costs incurred by Williams Innovation in complying with inquiries and obligations imposed by federal, state and municipal regulatory bodies/governments and related legal and billing expenses. The regulatory recovery fee may also include recovery of costs for legal, intellectual property, cybersecurity, compliance and other related expenses, including those related to number portability, customer privacy protection and anti-fraud protection. The regulatory recovery fee is not a tax or charge required or assessed by any government authority and may be recovered by Williams Innovation through imposition of a surcharge on cost of the Service.
- REGULATORY AND LEGAL CHANGES.
Williams Innovation may discontinue, limit, modify any Service, or impose additional requirements to the provision of any Service, as may be reasonably required to comply with any Applicable Laws. If changes in Applicable Laws materially and adversely affect delivery of Service (including the economic viability thereof), the Parties will use good faith efforts to negotiate appropriate changes to this Agreement. If the parties cannot reach agreement within thirty (30) days after Williams Innovation’s notice requesting renegotiation, Williams Innovation may, on a prospective basis after such 30-day period, pass any increased costs resulting from such changes on to Customer; provided, however, that Williams Innovation shall provide Customer written notice of any increased costs or charges and Customer may upon notice given to Williams Innovation within sixty (60) days after delivery of the notice of the increased charges terminate Service without liability for an early termination fee or charge. If Customer does not terminate Service within such 60-day period, Customer’s termination right shall expire and Customer shall be obligated to accept and pay for the Service until expiration or termination of the Service Term.
- PROHIBITED USE OF THE SERVICE.
Customer shall use the Services only in a manner that fully complies with all Applicable Laws and the terms and conditions of this Agreement, including the AUP. Any use of the Services or any other action in violation of this Section 9 or that causes a disruption in the Williams Innovation network integrity, or in Williams Innovation’s determination threatens or compromises the security of Williams Innovation, its vendors, its other customers or the Services whether directly or indirectly, is strictly prohibited and permits Williams Innovation to suspend or terminate the Services without prior notice at the sole discretion of Williams Innovation and further permits Williams Innovation to disclose any information, including Customer Confidential Information, to necessary authorities or third parties. Williams Innovation shall have the right, in its sole, but reasonably exercised discretion, not to accept, transmit or deliver any messages or content that it reasonably believes contains inappropriate content or that is, or could reasonably become, the subject of any legal, regulatory, or other governmental proceeding or process, including a law enforcement proceeding, process, or inquiry. Any use found to be inconsistent with the restrictions of this Section 9 may result in termination of the Services without prejudice to any other Williams Innovation rights or remedies.
- FRAUDULENT USE OF SERVICE.
Customer shall bear the risk of loss and assume all liability arising from any prohibited, unauthorized or fraudulent usage of Services. Any such prohibited, unauthorized or fraudulent use shall be deemed a material breach of the Agreement by Customer. Customer is responsible to secure all credentials used to access the Services, including credentials used by telephones or softphones and credentials used by end users or administrators, as well as the media access control (MAC) address of telephones used by Customer. Customer acknowledges that placing telephones on a publicly accessible internet protocol address or a publicly accessible network will subject the Customer to a higher level of risk for fraudulent activity. Customer shall not be excused from paying for Services or any portion thereof on the basis that fraudulent calls, and any charges associated with such calls (e.g. long distance charges), comprised a corresponding portion of the Services. In the event Williams Innovation discovers fraudulent calls being made, Customer consents to Williams Innovation taking actions it deems reasonably necessary (including blocking access to particular calling numbers or geographic areas), without notice to Customer, to prevent such calls from taking place. Customer acknowledges and agrees that Williams Innovation: (a) is under no obligation to investigate the authenticity of calls charged to Customer’s account, (b) is under no obligation to take action to prevent such calls from being made, and (c) is not liable for any fraudulent calls processed by Williams Innovation and billed to Customer’s account.
- NO RESALE.
Customer represents and warrants that it will be the ultimate end user of the Service. Customer shall not in any way resell, license, permit or otherwise allow any third party to use the Services without receiving Williams Innovation’s prior written consent, which may be withheld or conditioned in Williams Innovation’s sole discretion.
- THIRD PARTY NETWORKS.
In some cases, Williams Innovation may utilize the public Internet and third party networks outside of its control in conjunction with the provision and maintenance of the Services and its websites. In such cases, Williams Innovation makes no representation that the Internet or any such third party network will adequately secure or protect the privacy of Customer or any end user’s personal information, and Williams Innovation expressly denies any associated liability. Actions or inactions caused by these third party networks can result in situations in which Williams Innovation customers’ connections may be impaired or disrupted. Although Williams Innovation will use commercially reasonable efforts to remedy or avoid such events, Williams Innovation expressly disclaims warranties with respect to these third party networks or any disruptions that may occur thereon.
- REQUIRED MAINTENANCE.
Williams Innovation reserves the right to perform repair and maintenance on or upgrade, update or enhance
(collectively, the “Maintenance”) its network, infrastructure, website(s), Services and Williams Innovation Equipment with or without prior notice or liability to Customer, even if the Maintenance causes a partial or full disruption of the Services; provided, however, and subject to Williams Innovation’s business needs, Williams Innovation shall use commercially reasonable efforts to perform the Maintenance in a manner so as to avoid unduly interfering with Customer’s use of the Services, including by providing reasonable commercial notice where feasible.
- SUPPORT AND SERVICE LEVEL COMMITMENTS.
Customer will timely report any issues, trouble or problems affecting Service to Williams Innovation using a Customer initiated trouble ticket (a “Trouble Ticket”). Trouble Ticket procedures and additional information for Williams Innovation support can be found at https://williamsinnovation.com/support. Calls to and from Williams Innovation customer service, sales or other representatives may be recorded and/or monitored for quality assurance and training purposes and by speaking with such Williams Innovation representatives, Customer consents to such recording and/or monitoring. If Williams Innovation does not meet a performance or other service level commitment set forth in an applicable Service Level Agreement, and upon Customer’s timely request submitted in accordance with this Agreement or the applicable Service Level Agreement, a service credit will be issued to Customer as stated in the applicable Service Level Agreement. Customer’s sole remedies for any non-performance, outages, failures to deliver or defects in Service are set forth in the applicable Service Level Agreement and these Terms.
16. DEFAULT AND REMEDIES.
- Customer Default. If Customer either (a) fails to make any payment when due and such failure continues for five (5) business days after written notice from Williams Innovation, or (b) fails to observe or perform any other material term of this Agreement and such failure continues for thirty (30) days after written notice from Williams Innovation, then Williams Innovation may elect to: (i) terminate this Agreement and/or any Sales Order, in whole or in part; (ii) immediately suspend Customer’s Service, in whole or in part; or (iii) pursue all remedies Williams Innovation may have at law or in equity.
- Suspension of Services. Notwithstanding any other provision of this Agreement, Williams Innovation may suspend Customer’s right to access or use any portion or all of the Service immediately and without liability to Customer in any of the following circumstances: (i) Customer’s use of the Service violates and Applicable Laws or the AUP; (ii) Williams Innovation is legally required to suspend or terminate Service; (iii) Customer’s use of the Service poses a security risk to the Service or any third party or may subject Williams Innovation or any third party to liability; or (iv) the occurrence or threat of any other event or circumstance for which Williams Innovation reasonably believes that suspension of Service is necessary to protect the Williams Innovation (or other third-party) network, systems or customers.
- Williams Innovation Default. If Williams Innovation fails to observe or perform any material term of this Agreement, other than non-performance under or failure to comply with any Service Level Agreement, Customer may terminate any applicable Sales Order only after Customer has delivered written notice of such failure to Williams Innovation, such notice to contain reasonable detail describing any breach, and Williams Innovation has failed to remedy such failure within thirty (30) business days of its receipt of Customer’s written notice. In the event such failure is not capable of cure within the 30-day period, the time for Williams Innovation to cure will be extended to sixty (60) business days from the date that Williams Innovation received notice of such breach so long as Williams Innovation is diligently attempting to remedy such breach during that period.
17. WARRANTY DISCLAIMER.
WILLIAMS INNOVATION PROVIDES THE SERVICES, EQUIPMENT AND SOFTWARE ON AN “AS IS” AND “AS AVAILABLE” BASIS WITHOUT WARRANTY OR REPRESENTATION OF ANY KIND (EXCEPT FOR ANY THIRD PARTY MANUFACTURER WARRANTIES THAT MAY BE APPLICABLE TO EQUIPMENT PURCHASED BY CUSTOMER FROM WILLIAMS INNOVATION), WHETHER EXPRESS, IMPLIED,
STATUTORY OR OTHERWISE, AND SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT. WILLIAMS INNOVATION MAKES NO WARRANTY THAT THE SERVICES WILL MEET CUSTOMER REQUIREMENTS, SPECIFICATIONS, EXPECTATIONS OR
THAT THE SERVICES WILL BE UNINTERRUPTED, TIMELY, SECURE, ERROR-FREE, THAT ANY
DEFECTS IN THE SERVICES WILL BE CORRECTED, THAT THE SERVICES WILL OPERATE IN
COMBINATION WITH CUSTOMER CONTENT, CUSTOMER APPLICATIONS, OR WITH ANY OTHER HARDWARE, SOFTWARE, SYSTEMS OR DATA NOT PROVIDED BY WILLIAMS INNOVATION. CUSTOMER ACKNOWLEDGES THAT WILLIAMS INNOVATION DOES NOT CONTROL THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE SERVICES MAY BE SUBJECT TO LIMITATIONS, DELAYS AND OTHER PROBLEMS INHERENT IN THE USE OF SUCH COMMUNICATIONS FACILITIES. WILLIAMS INNOVATION IS NOT RESPONSIBLE FOR MESSAGES OR INFORMATION LOST OR MISDIRECTED DUE TO INTERRUPTIONS OR FLUCTUATIONS IN THE SERVICES OR THE INTERNET IN GENERAL, OR FOR ANY ISSUES RELATED TO THE
PERFORMANCE, USE, OPERATION OR SECURITY OF THE SERVICES THAT ARISE FROM CUSTOMER’S USE, CUSTOMER CONTENT, CUSTOMER APPLICATIONS, OR THIRD PARTY CONTENT. WILLIAMS INNOVATION DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES REGARDING THE RELIABILITY, ACCURACY, COMPLETENESS, CORRECTNESS OR USEFULNESS OF THIRD PARTY CONTENT. TO THE EXTENT THAT WILLIAMS INNOVATION CANNOT DISCLAIM ANY WARRANTIES
IN CERTAIN JURISDICTIONS, THE SCOPE AND DURATION OF SUCH WARRANTY WILL BE THE MINIMUM PERMITTED UNDER SUCH LAW. ALTHOUGH REASONABLE EFFORTS ARE MADE TO PROVIDE SECURITY FOR VOICEMAILS AND FAX TRANSMISSIONS, WILLIAMS INNOVATION MAKES NO GUARANTEES OR WARRANTIES OF SECURITY.
18. LIMITATION OF LIABILITY.
NEITHER WILLIAMS INNOVATION, NOR ITS AFFILIATES, VENDORS, SUPPLIERS, DISTRIBUTORS,
CHANNEL AND OTHER MARKETING PARTNERS OR OTHER REPRESENTATIVES SHALL BE
LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, REPLACEMENT COSTS, OR ANY LOSS OF REVENUE OR PROFITS, CONTENT, DATA,
OR DATA USE, EVEN IF WILLIAMS INNOVATION HAS BEEN INFORMED IN ADVANCE OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE REASONABLY BEEN FORESEEN BY WILLIAMS INNOVATION. WILLIAMS INNOVATION’S AGGREGATE LIABILITY FOR ALL DAMAGES ARISING OUT OF OR RELATED TO THIS AGREEMENT, WHETHER IN CONTRACT, TORT, OR OTHERWISE, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNTS ACTUALLY PAID TO WILLIAMS INNOVATION UNDER THIS AGREEMENT IN THE TWELVE (12) MONTH PERIOD IMMEDIATELY PRECEDING THE EVENT GIVING RISE TO A CLAIM SUBJECT TO THIS SECTION 18. THE PARTIES ACKNOWLEDGE AND ACCEPT THE REASONABLENESS OF THE DISCLAIMERS AND LIMITATIONS OF LIABILITY SET FORTH IN THIS SECTION 18.
Customer agrees to defend, indemnify and hold harmless Williams Innovation from and against any loss, damage or costs (including reasonable attorney’s fees) incurred in connection with claims made or brought against Williams Innovation by a third party arising from or relating to: (i) any act, error, omission, fault, negligence, or misconduct of Customer or any user of the Services, Software or Williams Innovation Equipment, whether authorized or unauthorized by Customer; (ii) Customer’s breach of any obligation, warranty, representation, or covenant of this Agreement or the AUP; (iii) any claim by any employee or invitee of Customer or user other than a claim based on the gross negligence or willful misconduct of Williams Innovation; (iv) any claim by any customer of Customer, end user or other third party relating to, or arising from, Customer Data or Customer’s use of the Services, Software or Williams Innovation Equipment; or (v) violation of any Applicable Laws by Customer or any Customer employee, contractor or agent.
- Confidential Information. “Confidential Information” means all nonpublic information relating to a Party or its Affiliates that (i) if provided in writing, is marked or labeled as confidential or proprietary, or (ii) if provided verbally, is designated as confidential at the time of disclosure, or (iii) even if not so marked, labeled or identified, given the nature of the information or the circumstances surrounding its disclosure, reasonably should be considered as confidential. Confidential Information includes, without limitation, all nonpublic information relating to (i) a Party’s or its Affiliates’ technology, customers, employees, business plans, agreements, finances and other business affairs, (ii) the Williams Innovation network or service delivery platform, and (iii) the terms of any Sales Order. Confidential Information does not include any information that (i) has become publicly available without breach of this Agreement, (ii) was known to the Party receiving Confidential Information under this Agreement (the “Receiving Party”) at the time of its receipt from the
Party disclosing the Confidential Information (the “Disclosing Party”) or its Affiliates as shown by documentation reasonably acceptable to Disclosing Party, (iii) is received from a third party who did not acquire or disclose such information by a wrongful or tortious act, or (iv) was independently developed by the Receiving Party without use of any Confidential Information as shown by documentation reasonably acceptable to Disclosing Party.
- Non-Use; Non-Disclosure. Each Party hereby agrees to hold Confidential Information in strict confidence and shall, in any case, protect such Confidential Information with no less diligence than that with which it protects its own confidential or proprietary information of a similar nature. The Receiving Party agrees not to use any Confidential Information of the Disclosing Party for any purpose unrelated to the Services. Each Party may disclose the Confidential Information of the other Party on a “need to know basis” and then only to its and its Affiliates’ directors, officers, advisors, employees and other legal, business or financial partners or representatives; provided that all such persons are subject to written confidentiality agreements which contain provisions which are no less restrictive than the provisions of this Section 20. In addition, Williams Innovation may disclose this Agreement under a comparable non-disclosure agreement in response to a third party due diligence request supporting a financing or non-ordinary course of business corporate transaction.
- Compelled Disclosure. If the Receiving Party is legally compelled by any means (including deposition, interrogatory, request for documents, subpoena, civil or regulatory investigative demand or similar process) to disclose Confidential Information of the Disclosing Party, subject to applicable laws, the Receiving Party must provide the Disclosing Party with prompt written notice of such legal requirement in order to allow the Disclosing Party to seek a protective order or other appropriate remedy or waive compliance with this Section 20.
- Return or Destruction. Upon the termination or expiration of this Agreement, or at any time upon the request of the Disclosing Party, the Receiving Party shall, at the Disclosing Party’s option, return or destroy (and certify as to such destruction) all Confidential Information of the Disclosing Party in its control or possession, other than copies which the Receiving Party may be required to maintain under applicable law or regulation.
- EMERGENCY 911 SERVICES.
By using the Service or Williams Innovation Equipment, Customer acknowledges the limitations of Williams Innovation E911 services as described in the E911 Acknowledgement, as well as those set forth in this Section 21. Customer is advised to thoroughly read and understand the E911 Acknowledgement and the options available. Customer acknowledges that it has received the E911 Acknowledgement and has read, understands and agrees to the terms and conditions of the E911 Acknowledgement, and assumes the risks associated with the Williams Innovation E911 service limitations. Any 911 related charges incurred from unprovisioned numbers originating from a customer’s PBX will be passed along to customer and payable upon invoice.
- LOCAL NUMBER PORTABILITY.
a. Number Transfer on Service Activation. In the event Customer is not utilizing a new phone number for the Services, but rather is transferring an existing phone number(s) which currently is subscribed to a carrier other than Williams Innovation for local, long distance and international telephone services, to Williams Innovation, the terms and conditions of this Section 22 shall apply:
i. Customer hereby authorizes Williams Innovation to process Customer’s order for Services and to notify Customer’s current local telephone company or other service provider of its decision to switch all local, local toll and long distance services to Williams Innovation, and represents and warrants that Customer is authorized to take this action; ii. Customer agrees and acknowledges that if the Williams Innovation Equipment is set up prior to the date that the number switch becomes effective (“Port Effective Date”), Customer may only be able to make outgoing calls over the phone connected to the Williams Innovation Equipment. In such event, Customer should keep another phone connected to an existing phone extension at its service location to receive incoming calls until the Port Effective Date, after which Customer will be able to both make and receive calls using the Service. Customer agrees and acknowledges that if its Williams Innovation Equipment is not yet activated as of the Port Effective Date, its existing phone service for the number being transferred may be disconnected and Customer may have no service for that line. Therefore, to avoid an interruption in Customer’s phone service, Williams Innovation Equipment must be installed prior to, or on, the Port Effective Date. An estimate of the Port Effective Date will be sent to Customer via e-mail by Williams Innovation following completion of the ordering process.
- Assignment. This Agreement inures to and is binding upon the Parties’ successors and permitted assignees. Customer shall not assign this Agreement without Williams Innovation’s prior written consent, not to be unreasonably conditioned, withheld or delayed; provided that Customer may, without consent, but with reasonable prior written notice, assign its rights and obligations hereunder to any parent, affiliate or subsidiary of Customer or pursuant to any merger, acquisition, reorganization, sale or transfer of all or substantially all its assets; provided, however, that any proposed assignee shall be at least as creditworthy as Customer (as reasonably determined by Williams Innovation), shall agree in advance and in writing to assume and be bound by all provisions of this Agreement, and shall deliver to Williams Innovation fully-executed documents reasonably acceptable to Williams Innovation establishing the terms of such an assignment. Any assignment by Customer other than as permitted by this Section 23(a) shall be void and of no force or effect.
- Force Majeure. Neither Party is liable for any failure of performance (other than for delay or performance in the payment of money due and payable hereunder) to the extent such failure is due to any cause or causes beyond such Party’s reasonable control, including acts of God, fire, explosion, vandalism, cable cut, adverse weather conditions, governmental action, acts of terrorism or strikes and similar labor difficulties. Either Party’s invocation of this clause will not relieve Customer of its obligation to pay for any Services actually provided or permits Customer to terminate any Services except as expressly provided herein. In the event such force majeure event prevents the availability or material use of the affected portion of Services and such event continues for more than thirty (30) consecutive days, either Party may terminate the affected portion of the Services without liability.
- Intellectual Property and Publicity. Except as explicitly granted herein, neither Party is granted a license or other right (express, implied or otherwise) to use any trademarks, copyrights, service marks, logos, trade names, patents, trade secrets or other form of intellectual property of the other Party or its affiliates without the express prior written authorization of the other Party. Customer will not issue any press release or other public statement relating to this Agreement, except as may be required by law or agreed by Williams Innovation in a writing signed by an authorized representative of Williams Innovation’s Corporate Communications department. Customer agrees that Williams Innovation may identify Customer using its name, trademarks and/or logos in its marketing collateral, presentations and websites, provided that Customer may revoke such right with written notice to Williams Innovation at any time.
- Nonexclusive. This Agreement is non-exclusive. Nothing in this Agreement prevents either Party from entering into similar arrangements with other persons or entities. e. Notices. Except as otherwise provided in this Agreement,
i. To Customer: In the event Williams Innovation is required or desires to provide Customer with notice under this Agreement, it will provide electronic notice to the e-mail address on file. In the event Customer changes its e-mail address for notice purposes, Customer shall advise Williams Innovation immediately in writing. Customer hereby agrees to electronic delivery of all required notifications, including invoices, unless otherwise expressly provided herein. ii. To Williams Innovation: Any notice required or given under this Agreement to Williams Innovation (except for billing disputes as described in Section 6) will be in writing and delivered to Williams Innovation as follows:
Attn: Legal Department
1000 Heritage Center Circle
Round Rock, TX 78664
Copies of notices shall be sent via e-mail (which shall not constitute formal notice) to:
Such address and contact information may be changed by either Party by prior written notice to the other Party in accordance with this paragraph. A notice will be deemed to be duly given (i) on the date of delivery if personally delivered by hand or by a nationally recognized overnight express courier, or (ii) upon the third day after such notice is deposited in the United States mail, if mailed by registered or certified mail, postage prepaid, return receipt requested. For clarity, e-mail notices are informational only and shall not constitute formal notice.
- Facsimile and Electronic Transmission; Counterparts. Sales Orders, and other documents that may be executed in connection with the Services (collectively “Service Documentation”), may be executed and delivered by facsimile or electronic transmission, and upon receipt, such transmission shall be deemed the delivery of an original. Service Documentation may be executed in several counterparts, each of which when executed shall be deemed to be an original, and such counterparts shall each constitute one and the same instrument.
- Electronic Communications and Consent to use of Electronic Signatures and Records. By ordering, purchasing or using the Services, Customer agrees that Williams Innovation may provide to Customer by use of electronic communications any required notices, agreements and other information concerning Williams Innovation, including changes to these Terms. In addition, by requesting and approving changes to services via electronic communication Customer agrees and acknowledges to conduct business electronically and be bound by the applicable agreement, document or transaction.
- Basis of Bargain; Failure of Essential Purpose. Customer acknowledges and agrees that Williams Innovation has established its prices and entered into this Agreement in reliance upon the limitations and exclusions of liability and the warranty disclaimers set forth in this Agreement, and that they are an essential basis of the bargain between the parties and are material terms of this Agreement. The Parties agree that the limitations and exclusions of liability and warranty disclaimers specified in this Agreement will survive and apply even if found to have failed their essential purpose, and Customer hereby waives its right to contest the enforceability of any provision of this Agreement by reason of such failure.
- No Commitments. Customer represents that Williams Innovation has made no commitments or promises orally or in writing with respect to delivery of any future features or functions. In relation to any future features or functions, all presentations, RFP responses, and/or product roadmap documents, information or discussions, either prior to or following the date herein, are informational only, and are not the basis for, nor part of this this Agreement or any Sales Order. Williams Innovation has no obligation to provide any future releases or upgrades or any features, enhancements or functions, unless specifically agreed to by both Parties. Customer acknowledges that its purchasing decisions are not based upon any future features or functions.
- Survival, Modification. The terms and conditions of this Agreement will survive the expiration or other termination of this Agreement to the fullest extent necessary for their enforcement and for the realization of the benefit thereof by the Party in whose favor they operate. Except for the rights of Williams Innovation in Section 1, all modifications, amendments, supplements to or waivers of this Agreement must be in writing and executed by authorized representatives of both parties.
- Relationship of the Parties. The relationship of Williams Innovation and Customer shall not be that of partners, agents or joint ventures for one another, and nothing contained in the Agreement shall be deemed to constitute a partnership or agency agreement between the Parties for any purposes. Williams Innovation and Customer shall be independent parties and shall discharge their contractual obligations at their own risk subject to the terms of this Agreement.
- Third Party Services. Williams Innovation may use or rely on one or more licensors, service providers, and/or equipment providers or equipment lessors whose products, equipment and/or services are provided in conjunction with, or incorporated into, the Services and/or Williams Innovation Equipment (“Third-Party Services”). Each provider of such Third-Party Services (a “Third-Party Service Provider”) is expressly made a third party beneficiary under the applicable Sales Orders and this Agreement and shall have the right to enforce the terms and conditions of the Sales Orders and this Agreement respecting any terms affecting such Third Party Service Provider as if such Third-Party Service Provider were a party to the Sales Order and/or this Agreement. Further, Third-Party Services may be governed by separate legal terms and conditions, which may be found or identified in documentation or on other media delivered with the Third-Party Services and which are incorporated by reference into these Terms and shall govern the use of Third-Party Services. Customer agrees to comply with such terms and conditions of all Third-Party Services and Third-Party Service Providers. Any non-compliance with terms and conditions of Third Party Service Providers shall be considered non-compliance with these Terms.
- Waiver. The failure of either Party to enforce compliance with a provision of this Agreement shall not be construed as a general waiver of such provision or any other provision.
- Severability. If any term, covenant or condition contained in this Agreement or any Sales Order is, to any extent, held invalid or unenforceable in any respect under the laws governing this Agreement, the remainder of this Agreement shall be valid and enforceable to the fullest extent permitted by law.
- Governing Law. The laws of the State of Texas will govern this Agreement, without reference to its principles of conflicts of laws. Because this agreement is a transaction in interstate commerce, the Federal Arbitration Act (“FAA”), and not state arbitration law, shall govern the interpretation and enforcement of the arbitration provision in Section 24, below.
- Entire Agreement. This Agreement, together with the applicable Sales Order(s), supersedes any prior or contemporaneous agreements, statements, understandings, writings, commitments, or representations concerning its subject matter, as between Customer and Williams Innovation.
24. DISPUTE RESOLUTION; BINDING ARBITRATION.
- Management Resolution. In the event either Party has a dispute or claim against the other Party (except with respect to invoice disputes which are addressed in Section 6), the disputing Party shall provide written notice to the other Party in accordance with the provisions of Section 23(e), above. The Parties agree to escalate disputes to their respective management, who will use commercially reasonable efforts to resolve the dispute by consulting with each other in good faith to reach an equitable resolution satisfactory to both parties within thirty (30) days of the receipt of notice. Neither Party shall pursue or commence proceedings regarding the dispute in any court, administrative arbitral or other adjudicative body prior to engaging in such consultations and negotiations. In the event the dispute is not resolved, and the claim falls within the dollar limit allowed by applicable state law along with any other jurisdictional requirements, either Party may seek to have that dispute resolved in small claims court in any state in which Services are provided to the Customer by Williams Innovation.
- Binding Arbitration. If negotiations fail to resolve the dispute within thirty (30) calendar days, and/or small claims court is not a valid option due to the size or nature of the claim, all disputed claims (except for claims relating to intellectual property rights, indemnity, or confidentiality obligations, fraudulent or unauthorized use, theft, or piracy of service, or matters relating to injunctions or other equitable relief) must be resolved by binding arbitration before a single arbitrator in accordance with the rules of the American Arbitration Association (“AAA”) then in effect. This agreement to arbitrate is intended to be given the broadest possible meaning under Applicable Laws. The initiation of an arbitration dispute shall not otherwise prevent Williams Innovation or Customer from terminating Services in accordance with the Terms.
- Notice. A Party who intends to seek arbitration must first send to the other Party a written notice of dispute, which must describe the nature and basis of the dispute and set forth the specific relief sought. If an agreement to resolve the dispute is not reached, an arbitration proceeding may be commenced by downloading or copying a form from the AAA website (http://www.adr.org). The amount of any settlement offer made by Customer or Williams Innovation shall not be disclosed to the arbitrator until after the arbitrator determines the amount, if any, to which Customer or Williams Innovation is entitled.
- Location. All hearings conducted as part of the arbitration shall take place at a location, convenient to Customer, based upon Customer’s billing address. If Customer claim is for $10,000 or less, Customer or Williams Innovation may request that the arbitration be conducted solely on the basis of documents submitted to the arbitrator or through a telephonic hearing. If either party objects, then the arbitrator shall proceed to an inperson hearing as established by the AAA Rules. If Customer claim is in excess of $10,000, the right to a hearing will be determined by the AAA rules.
- Costs. Each Party will be responsible for its own costs incurred in the arbitration, including arbitration filing fees and attorneys’ or expert witness fees. The arbitrator’s costs and expenses shall be shared equally between the Parties. If a Party elects to appeal an award, the prevailing Party in the appeal shall be entitled to recover all reasonable attorneys’ fees incurred in that appeal.
- Waiver of Jury Trial. Customer and Williams Innovation agree that, by entering into this agreement, Customer and Williams Innovation are waiving the right to a trial by jury. Customer and Williams Innovation agree that the arbitrator may award relief only in favor of the individual Party seeking relief and only to the extent necessary to provide relief warranted by that Party’s individual claim. The arbitrator may not award special, indirect, punitive, incidental or consequential damages. CUSTOMER AND WILLIAMS INNOVATION AGREE THAT CUSTOMER MAY BRING CLAIMS AGAINST WILLIAMS INNOVATION ONLY IN CUSTOMER’S INDIVIDUAL CAPACITY AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY PURPORTED CLASS OR REPRESENTATIVE PROCEEDING AND THAT CUSTOMER EXPRESSLY WAIVES ITS RIGHT TO BRING A CLASS ACTION SUIT. Customer and Williams Innovation agree that the arbitrator may not consolidate more than one person’s or entity’s claims, and may not otherwise preside over any form of a representative or class proceeding.
BY SIGNING BELOW, THE PERSON SIGNING ON BEHALF OF CUSTOMER PERSONALLY REPRESENTS
AND WARRANTS TO WILLIAMS INNOVATION THAT HE OR SHE HAS THE AUTHORITY AND POWER TO SIGN ON BEHALF OF CUSTOMER AND BIND CUSTOMER TO THIS AGREEMENT. CUSTOMER UNDERSTANDS AND AGREES TO BE BOUND BY THE TERMS AND CONDITIONS FOR SERVICE AS DESCRIBED IN THE ATTACHED TERMS AND CONDITIONS AND SERVICE ADDENDUM(S), WHERE APPLICABLE, CUSTOMER UNDERSTANDS THAT IF IT TERMINATES THIS AGREEMENT PRIOR TO SERVICE ACTIVATION, CUSTOMER WILL OWE WILLIAMS INNOVATION AN EARLY TERMINATION FEE, AS DESCRIBED IN THE TERMS AND CONDITIONS. CUSTOMER AUTHORIZES WILLIAMS INNOVATION TO OBTAIN BILLING INFORMATION AND CUSTOMER SERVICE REPORTS WITH RESPECT TO CUSTOMER’S TELEPHONE NUMBERS, AS WELL AS CUSTOMER’S CREDIT INFORMATION. THIS AGREEMENT IS ACCEPTED BY WILLIAMS INNOVATION ON THE DATE INDICATED BELOW, AND THE SERVICE PERIOD SHALL BEGIN, UPON THE INITIATION OF SERVICE